Get Printer Setup & Installation Help- 123.hp.com/setup


Excited about your newly bought printer and ready to unbox it? Well, we are here to help you with its complete installation so that you can start printing in no time. 
 The first and foremost thing one should do after getting the HP printer is to read its user manual carefully. Although reading a user manual might seem hectic at once, you can also get its online version from the official website 123.hp.com/setup. Once you have gone through all the necessary instructions, you are all set to lay a hand on your beautiful printer.
 Step Guide on installing a printer via-  123.hp.com/setup
 Step 1: Unboxing the Printer
1.      Take out your printer from the cardboard box.
2.      Remove the wrapping material around it and inside the scanner lid.
3.      Check if there is any wrapping material, tapes etc. inside your ink cartridge, and sliding paper try and remove it.
4.      Take out the power cable, USB and other accessories you got with the printer. They might come in handy during installation.
Step 2: Connect with a Power source
1.      Take the power cable you got with the printer and make a connection between the power socket and the printer. Connect one end of the wire to the rear side of the printer and other to the power socket.
2.      Switch the power to the printer.
3.      Go to the control panel of your printer and set the date, time and preferred country and language to continue.
Step 3: Placing paper sheets into the input tray
Placing a paper into the tray is no less than an art. Most of the time people face, paper jam issue because of poor placement of paper in the input tray. Place the bundle of sheets within the boundaries and make sure the corners are not folded. Also, don’t overload the tray and close it properly. 
Step 4: Check the Ink Cartridges
Install the ink cartridges properly. See the animated instructions on the panel if you are new to this. 
Open the ink cartridge and hold it from the black plastic side. Install the black cartridge to the left slot and tri-colour cartridge to the right slot. Repeat the steps to fill the cartridge gently. 

Installing a Printer driver from 123.hp.com/setup
1.      Visit the URL 123.hp.com/setup
2.      Go to the printer menu, enter your printer’s model number in the search bar and click on Submit
3.      Select the operating system your computer has and the windows version you are currently using and Click on Update.
4.      Download the printer driver from the website.
5.      Double click the downloaded driver, Click and Run to install.
6.      Make sure your printer is connected with the network through a Wifi, wired network or a USB cable and your printer is all set to print.
 The above-mentioned steps will help you to set up your new printer easily. In case you need technical assistance, do feel free to check the FAQ section at 123.hp.com.
Ref Url = https://our-printercare-us.tumblr.com/post/625041414988988416/get-printer-setup-installation-help


Comments

Popular posts from this blog

123.hp.com/setup: Download And Install HP Printer Software

Select HP printer model & Get Setup using 123.hp.com

123.hp.com/setup: Download The Recommended Software For Your Printer